Skip to content

TKWL-1400 Series 80GHz Radar Level Gauge

The TKWL-1400 Series 80GHz Radar Level Gauge is a W-band 76-81 GHz FMCW radar product supporting two-wire and four-wire applications. It outputs 4-20 mA analog signals and can measure up to 120 m.

With higher frequency and shorter wavelength, it is especially suitable for solid applications. The lens antenna design provides advantages in high dust and harsh temperature environments, with threaded or flanged mounting for easy installation.

The instrument uses frequency modulated continuous wave technology. The antenna sensor emits a continuous microwave signal whose frequency is linearly modulated. When the signal reaches the measured medium surface, part of the energy is reflected and received by the lens antenna system. The frequency difference between transmitted and received signals is proportional to the distance to the medium surface.

  • Simple display interface and quick setup menu.
  • Non-contact measurement without wear or contamination.
  • Short wavelength with better reflection on solid surfaces.
  • High signal-to-noise ratio and small blind zone.
  • Narrow 3° antenna beam angle for reduced installation interference.
  • Little influence from corrosion, foam, water vapor, temperature and pressure changes.
  • 5 GHz working bandwidth for high resolution and accuracy.
Model Application Range Accuracy Temperature Pressure Antenna
TKWL-1401 Liquids and mildly corrosive liquids 120 m ±1 mm -40 to 100°C / -40 to 1000°C Atmospheric / -0.1 to 1.0 MPa Lens
TKWL-1402 Highly corrosive liquids with complex process conditions 120 m ±1 mm -40 to 120°C / -40 to 200°C Atmospheric / -0.1 to 4.0 MPa Lens
TKWL-1403 Solids in storage or process vessels, heavy dust, crystallization or condensation 120 m ±1 mm -40 to 200°C Atmospheric / -0.1 to 4.0 MPa Lens
Item Specification
Frequency 80 GHz
Output signal 4-20 mA / HART / Modbus
Power supply Two-wire DC24 V; four-wire DC24 V / AC220 V
Field display Standard
Process connection Thread, flange or bracket
Explosion-proof marking ExdbIICT6 Gb, ExiaIICT6 Ga, ExdbIIBT4 Gb, Extb IIICT80°C Db
  • Electrical entry: M20×1.5, 1/2NPT or customized.
  • Enclosure material: cast aluminum or stainless steel.
  • Electronic components: 4-20 mA/HART with 24 VDC two-wire, 24 VDC four-wire or 220 VAC four-wire options.
  • Sealing temperature depends on model, including standard and high-temperature sealing with radiator.
  • Process connection includes G1-1/2, G3-1/2 and DN50 to DN150 flanges, with customization available.
  • Explosion protection: ordinary type or explosion-proof type.
  • Required model and measured medium.
  • Measurement range, temperature and pressure.
  • Output signal, power supply and enclosure material.
  • Process connection and sealing temperature.
  • Explosion-proof requirement and installation condition.
  • TKWL-1100 series 26GHz high-frequency radar level gauge.
  • TKWL-1300 series guided wave radar level gauge.

View this product PDF catalogue online, or return to the Level Meter downloads page for related documents.

View Product PDF View All Level Meter Downloads