Vaporizer Furnace High Temperature Thermocouple
Product Overview
Section titled “Product Overview”The vaporizer furnace high temperature thermocouple is suitable for vaporization-furnace hearth temperature measurement in the gas chemical industry and furnace-hearth temperature measurement in the coal chemical industry. It is a special high temperature thermocouple for GE-TEXACO furnace temperature measurement. When the thickness of furnace bricks and lining walls changes, the thermocouple can adjust its own expansion and contraction to reach an appropriate temperature-measurement position.
Applications
Section titled “Applications”- Vaporization-furnace hearth temperature measurement in the gas chemical industry.
- Furnace-hearth temperature measurement in the coal chemical industry.
- GE-TEXACO furnace temperature-measurement applications.
Product Advantages
Section titled “Product Advantages”- Its expansion and contraction can be adjusted when furnace-brick and lining-wall thickness changes, to adapt to the temperature-measurement position.
- The structure includes a direction rotating ball, limit conduit and vibration damping spring.
- The outer protection tube uses pressure-free sintered silicon carbide, with a slow-heating inner protection tube.
- high-temperature resistance, high-pressure resistance, wear resistance, good airtightness and a secondary leakage-prevention structure.
- Nominal pressure is not more than 10 MPa.
Installation Method
Section titled “Installation Method”The structure diagram shows a direction rotating ball, limit conduit, vibration damping spring and flange connection. Selection should be based on changes in furnace-hearth wall thickness, installation location and required insertion length.
Key Parameters
Section titled “Key Parameters”| Model | Graduation | Temperature Measurement Range | Nominal Pressure | Protective Tube Material |
|---|---|---|---|---|
| WRR-440QH | S, B | 0 to 1600°C | ≤10 MPa | Pressure-free sintered silicon carbide (SSiC) |
Main Models
Section titled “Main Models”- WRR-440QH
Information Required for Inquiry
Section titled “Information Required for Inquiry”- Furnace type, temperature-measurement position, and whether the application is a GE-TEXACO furnace hearth.
- Furnace-brick and lining construction, including the range of wall-thickness change.
- Actual operating temperature range and operating pressure.
- Required graduation, insertion length and flange mounting dimensions.
- Measured medium, wear conditions and required quantity.