Fluoroplastic Insulation Flame-Retardant Power Cable
Product Overview
Section titled “Product Overview”This flame-retardant power cable with fluoroplastic insulation is designed for electrical equipment rated up to 0.6/1kV where high temperature or corrosive conditions are present. Fluoroplastic insulation and sheath constructions provide high-temperature resistance, chemical resistance and flame-retardant performance.
Applications
Section titled “Applications”- Electrical equipment requiring high-temperature or flame-retardant cable.
- Metallurgy, power, chemical and petroleum installations.
- Fixed indoor installation and routes requiring armoured mechanical protection.
Product Features
Section titled “Product Features”- Rated voltage U₀/U: 0.6/1kV.
- Maximum operating temperature of fluoroplastic insulation: 200℃.
- Installation temperature: not lower than -15℃.
- Minimum bending radius: 20D for single-core cables and 15D for three-core cables.
- Good resistance to chemical corrosion, high temperature and flame.
Key Parameters
Section titled “Key Parameters”| Item | Specification |
|---|---|
| Standards | TICW2-2009, JB/T 13484-2018 and enterprise standard |
| Insulation code | F: fluoroplastic insulation |
| Sheath code | G: silicone rubber sheath; F: fluoroplastic sheath |
| Armour code | 2: steel tape armour; 9: galvanized steel wire braid armour |
| Common types | FF, FF2F, FF9F, (ZR)-FG |
| Cross-section | Typically 1.5-185mm² for FF/FG; 1.5-70mm² for armoured types; selected FG constructions up to 240mm² |
Technical Requirements
Section titled “Technical Requirements”- DC conductor resistance at 20℃ complies with GB/T 3956.
- Finished cables undergo a 3500V/5min AC withstand test without insulation breakdown.
- Non-magnetic materials should be used for single-core armoured cables in AC systems.
Product Downloads
Section titled “Product Downloads”View this product PDF catalogue online, or return to the Wire & Cable downloads page for related documents.
View Product PDF View All Wire & Cable Downloads