Thermocouple for Blast Stove
Product Overview
Section titled “Product Overview”The thermocouple for blast stove is suitable for temperature measurement of hot-air-supply pipes, furnace roofs and other positions of blast stoves in the iron and steel industry. The service temperature is 600 to 1600°C. Its outer sleeve is made of imported pressure-free sintered silicon carbide tube and lined with a double-layer high-quality corundum tube, forming a multilayer protection structure.
Applications
Section titled “Applications”- Temperature measurement of hot-air-supply pipes of blast stoves in the iron and steel industry.
- Temperature measurement of blast-stove furnace roofs and other positions in the iron and steel industry.
- Applications with high temperature, oxidizing and reducing gas corrosion, and gas-flow scouring.
Product Advantages
Section titled “Product Advantages”- The service temperature is 600 to 1600°C.
- Withstands combined corrosion from oxidizing and reducing gases.
- Resistant to gas-flow scouring.
- Outer sleeve made of imported pressure-free sintered silicon carbide tube and lined with a double-layer high-quality corundum tube.
- Multilayer protection structure, with nominal pressure not more than 10 MPa.
Installation Method
Section titled “Installation Method”The structure diagram shows flange mounting. For selection, provide required length L, insertion depth H, installation length T, protective-tube diameter D and flange connection dimensions.
Key Parameters
Section titled “Key Parameters”| Model | Graduation | Temperature Measurement Range | Nominal Pressure | Protective Tube Material |
|---|---|---|---|---|
| WRP-430RF | S, B | 0 to 1600°C | ≤10 MPa | Silicon carbide |
Main Models
Section titled “Main Models”- WRP-430RF
Information Required for Inquiry
Section titled “Information Required for Inquiry”- Installation position, such as a hot-air-supply pipe, furnace roof or another measuring point.
- Actual operating temperature range, pressure and gas-flow scouring conditions.
- Gas composition and oxidizing or reducing atmosphere.
- Required graduation, length L, insertion depth H, installation length T and protective-tube diameter D.
- Flange connection dimensions and required quantity.