Skip to content

Fieldbus Cable

This fieldbus cable is designed for 31.25kHz automation systems with 100Ω characteristic impedance. It supports digital, bidirectional and multipoint communication between monitoring loops, intelligent measurement devices and control equipment in open, distributed FOUNDATION Fieldbus networks.

  • FOUNDATION Fieldbus automation control systems.
  • Industrial process monitoring, intelligent measurement and control equipment.
  • Cable trays, brackets and tunnels in indoor, wet outdoor or dry environments.
  • Rated voltage: 300/500V; long-term conductor temperature: 70℃.
  • Maximum bending radius: 12D for metal-tape-shielded or metal-wire-armoured cables and 8D for metal-wire braided cables.
  • Minimum laying temperature: not lower than 0℃.
  • Types A, B, C and D support maximum cable lengths of 1900m, 1200m, 400m and 200m respectively.

Using an 18AWG, 0.8mm² finished cable as an example:

Item Specification
Conductor resistance at 20℃ ≤24.0Ω/km
Shield characteristic impedance 9Ω/km for single pair; 18Ω/km for multi-pair
Operating capacitance at 1kHz Core-to-core ≤60pF/m; core-to-shield ≤115pF/m
Capacitance unbalance to earth ≤2000pF/km
Characteristic impedance at 31.25kHz 100±20Ω
Attenuation at 39kHz ≤3.0dB/km
Transmission speed 31.25kbit/s
AC withstand test 1kV/1min
Insulation resistance At least 3000MΩ·km at 20℃

FF-A indicates FOUNDATION Fieldbus Type A; Y/FPE indicate PE or foamed PE insulation; P, P1, P3, P4 and P5/P3P1 indicate shielding combinations; 2, 3 and 9 indicate armour constructions.

IEC 61158-2-2010, T/CES 100-2022 and T/HGJ 12400-2021.

View this product PDF catalogue online, or return to the Wire & Cable downloads page for related documents.

View Product PDF View All Wire & Cable Downloads