Skip to content

Wind Power Cable

This wind power cable is designed for power connections in nacelles, towers and fixed installations of wind turbines. It is suitable for wind power or similar systems rated up to 1.8/3kV, with constructions selected for torsion, low-temperature and mechanical bending conditions.

  • Power connections inside wind turbine nacelles and towers.
  • Fixed installations and equipment subject to continuous twisting.
  • Wind power systems in normal, cold and severe-cold environments.
  • Rated voltage options: 450/750V, 0.6/1kV and 1.8/3kV.
  • Long-term conductor temperature: 70℃ for 450/750V cables and 90℃ for 0.6/1kV and 1.8/3kV cables.
  • Minimum bending radius: 6 times the cable diameter.
  • Minimum ambient temperature: -25℃ for general types, -40℃ for cold-resistant types and -55℃ for severe-cold types.
Type Construction or use
FDEF-25(-40) EPR insulation and chloroprene rubber sheath, cold and torsion resistant
FDEG-40(-55) EPR insulation and silicone rubber sheath, cold or severe-cold resistant
FDGG-40(-55) Silicone rubber insulation and sheath, torsion and cold resistant
FDGU-40(-55) Silicone rubber insulation with TPU sheath, torsion and cold resistant
FDEU-40(-55) EPR insulation with PU sheath, torsion and cold resistant
FDEH-25(-40) EPR insulation with chlorosulfonated polyethylene sheath, low-temperature type

At 450/750V and 0.6/1kV, core options include 1, 2, 3, 3+1, 4 and 5 cores with approximate cross-sections from 1 to 400mm². At 1.8/3kV, common options are 1 core 10-400mm² or 3 cores 10-240mm².

TICW1-2009 and enterprise standard.

View this product PDF catalogue online, or return to the Wire & Cable downloads page for related documents.

View Product PDF View All Wire & Cable Downloads